View Single Post
Old 12-01-2019, 10:28 PM   #5
Ken/Alabama
Senior Member
 
Ken/Alabama's Avatar
 
Join Date: May 2010
Location: Alabama
Posts: 2,271
Default Re: Oil Pressure Reading

I ran into the same program when I fired up the V12 in my Zephyr. The dash gauge reads 0-50. I was reading low oil pressure . Screwed a mechanical gauge in the block to verify it actually had good oil pressure. The sender I had in it was marked 80 on one of the square shoulders. Went through my stash and found one that wasn’t marked, they are the 50 lb units. Gauge started reading same as mechanical gauge then.
Ken/Alabama is online now   Reply With Quote