The Ford Barn - View Single Post

Ol' Ron · 11-04-2019, 06:14 PM

there also should be a grub screw between the two. this forces the oil through the filter. If you don't use a filter, you must remove the screw or you'll prevent the oil from getting to the bearings. On another The canadian system sues a special fitting on the output of the pump.. THere might be a photo of this some where on the barn.

11-04-2019, 06:14 PM	#3
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,859	Re: late flathead oiling? there also should be a grub screw between the two. this forces the oil through the filter. If you don't use a filter, you must remove the screw or you'll prevent the oil from getting to the bearings. On another The canadian system sues a special fitting on the output of the pump.. THere might be a photo of this some where on the barn.