View Single Post
Old 10-27-2015, 06:51 PM   #145
oz40
Senior Member
 
oz40's Avatar
 
Join Date: May 2010
Location: Paradise - Australia
Posts: 306
Default Re: Double Trouble - Sloper

As part of the fit-up of the floor sections, the 3 x sections and the two sill section had to be stripped back off the EDP black as the spot welder will not penetrate through the surface faces.
After stripping with the die grinder, all the surface faces were primered with weld through primer.
Attached Images
File Type: jpg IMG_0123.jpg (51.7 KB, 31 views)
File Type: jpg IMG_0114.jpg (47.7 KB, 28 views)
File Type: jpg IMG_0156.jpg (24.7 KB, 28 views)
oz40 is offline   Reply With Quote