The Ford Barn - View Single Post

john charlton · 12-08-2018, 12:58 PM

28/29 frames are drilled both sides for RHD and LHD for the steering box.30/31 frames are mostly drilled on one side depending whether the vehicle was built RHD or LHD .However there are 30/31 frames that are drilled both sides there is one under my P/U which also has the early handbrake cross shaft . This early 30/31 frame is in the minority and does come with the correct "low dip" rad mount area . If you see a frame which at first glance has only one steering box hole it is definately 30/31.

John in Suffolk County England.

12-08-2018, 12:58 PM	#7
john charlton Senior Member Join Date: May 2010 Posts: 1,304	Re: Identifying a model A frame 28/29 frames are drilled both sides for RHD and LHD for the steering box.30/31 frames are mostly drilled on one side depending whether the vehicle was built RHD or LHD .However there are 30/31 frames that are drilled both sides there is one under my P/U which also has the early handbrake cross shaft . This early 30/31 frame is in the minority and does come with the correct "low dip" rad mount area . If you see a frame which at first glance has only one steering box hole it is definately 30/31. John in Suffolk County England.