View Single Post
Old 09-30-2015, 11:00 PM   #28
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Cutout problem, I think!

You'll need to disconnect the ground side of the field windings to check the fields for shorts to the case. Ant that's what just happened with the cutout mounting screws that were too long. I've found that good fields for the common long style generator will show 4 to 5 amps when connected to a 6 volt battery charger.

The powerhouse have much more wire in the 6 field coils and only draws about 1 1/2 amps for the 5 brush and about 2 amps for the 3 brush powerhouse.
Tom Wesenberg is offline   Reply With Quote