The Ford Barn - View Single Post

Don Rogers · 09-09-2019, 08:24 AM

David, Here's another oddity...The speedometer cable to firewall(dash) clip on 1935/36 passenger cars is held in place by a 1/4"-20 x 1 round head machine screw (26547-S2). But the same clip on pickups and panel deliveries is held in place by a 12-24 x 1" round head screw (26547-S2). I know this because I tried in vain to force a 1/4" screw into the 12-24 clinch nut hole in my 35 panel delivery firewall.

09-09-2019, 08:24 AM	#32
Don Rogers Senior Member Join Date: May 2010 Location: Wildwood, MO. (near St. Louis) Posts: 1,792	Re: 1936 floorboard screws David, Here's another oddity...The speedometer cable to firewall(dash) clip on 1935/36 passenger cars is held in place by a 1/4"-20 x 1 round head machine screw (26547-S2). But the same clip on pickups and panel deliveries is held in place by a 12-24 x 1" round head screw (26547-S2). I know this because I tried in vain to force a 1/4" screw into the 12-24 clinch nut hole in my 35 panel delivery firewall.