View Single Post
Old 12-10-2014, 05:52 PM   #84
Senior Member
Join Date: Jun 2012
Location: Central NH
Posts: 184
Default Re: 59 AB engine rebuild

Update. I brought the block to the machine shop and checked for cracks.
NO Cracks, good news. The bad news is that some of the cylinder walls do have some bad
pitting and the shop is recommending boring it 0.030 over.
He said he will try honing first. I was really hoping that I would not have to bore it out, is there any advice anyone can give me.

If I do get it bored to 0.030 over what are my options with new pistons, where can I get new ones from?
Macdozer is offline   Reply With Quote