View Single Post
Old 10-05-2014, 05:42 PM   #31
mrfliboy
Senior Member
 
mrfliboy's Avatar
 
Join Date: Jul 2013
Location: IL
Posts: 297
Default Re: 1941 Ford Pickup frame-off restore for the next generation

Reassembly time to rolling chassis.

Front U bolts needed shrank a little. Seems the truck frame had a additional support inside the cross member and the new U bolts I got were a tad long, so cut down 1/2" and rethreaded 3/4" more and redrilled cotter pin hole. Left is new, middle is shortened and right is original.

Front end done, shocks and springs bolted in.

Engine cleaning begins, used a friendly cleaner, spray bottle, and lots of elbow grease. New mounts installed and back in the frame.

Trans pulled/checked/cleaned. Its all there, wanted to make sure nothing broke/missing in there is all.
Attached Images
File Type: jpg 111reassembly.jpg (70.3 KB, 196 views)
File Type: jpg 112frontubolts.jpg (79.7 KB, 155 views)
File Type: jpg 113frontenddone.jpg (79.6 KB, 159 views)
File Type: jpg 114funbegins.jpg (69.1 KB, 143 views)
File Type: jpg 115almostdone.jpg (79.7 KB, 169 views)
File Type: jpg 116enginein.jpg (86.8 KB, 166 views)
File Type: jpg 117trans.jpg (74.0 KB, 154 views)
File Type: jpg 118PP.jpg (54.3 KB, 146 views)
File Type: jpg 119cleantrans.jpg (72.1 KB, 159 views)

Last edited by mrfliboy; 10-15-2014 at 09:25 PM.
mrfliboy is offline   Reply With Quote