View Single Post
Old 01-04-2016, 10:05 AM   #148
Senior Member
mrfliboy's Avatar
Join Date: Jul 2013
Location: IL
Posts: 297
Default Re: 1941 Ford Pickup frame-off restore for the next generation

Time for final tear down and onto paint. Oh Boy!!!

Luckily my passenger door was original and still completely intact. My disassembly was as the pictures go , One way to do it I guess.

Was able to remove the glass and not destroy anything. But also found some rot along the bottom edge that will need to be addressed.

Also I found remnants of (I presume) original glass down inside door.

Got the complete wiring harness out in 1 piece. Wasn't as bad as I thought actually. Unfortunately my gauge panel will need some interior work, chunks of paint floating around and now missing numbers off odometer. Hard to believe this was still operational.

Will be removing cab tonight, frame going outside, building my spray booth this week hopefully.
Attached Images
File Type: jpg IMG_20160102_104100861[1].jpg (72.7 KB, 87 views)
File Type: jpg IMG_20160102_104636915[1].jpg (63.4 KB, 77 views)
File Type: jpg IMG_20160102_105039107[1].jpg (60.5 KB, 74 views)
File Type: jpg IMG_20160102_105249818[1].jpg (56.1 KB, 71 views)
File Type: jpg IMG_20160102_105322627[1].jpg (68.8 KB, 72 views)
File Type: jpg IMG_20160102_111053834[1].jpg (58.5 KB, 78 views)
File Type: jpg IMG_20160102_143828293[1].jpg (72.5 KB, 92 views)
File Type: jpg IMG_20160103_114707238[1].jpg (68.2 KB, 129 views)

Last edited by mrfliboy; 01-04-2016 at 10:10 AM.
mrfliboy is offline   Reply With Quote