View Single Post
Old 12-01-2015, 07:48 AM   #133
Senior Member
mrfliboy's Avatar
Join Date: Jul 2013
Location: IL
Posts: 297
Default Re: 1941 Ford Pickup frame-off restore for the next generation

[QUOTE=38bill;1198550]When I built my '38 pickup 16 years ago they didn"t have lower door skins or cab corners available so I made my own. For the door I used a flat piece of sheet metal that I had the supplier form a 90 deg break along the bottom edge. This gave me a good starting point. I fit it to the door and cut it to length to allow the ends to fold over. FYI: I bonded mine instead of welding it, worked great.

Thanks Bill, that is perfect. Appreciate it.
mrfliboy is offline   Reply With Quote