View Single Post
Old 05-05-2015, 07:35 AM   #70
mrfliboy
Senior Member
 
mrfliboy's Avatar
 
Join Date: Jul 2013
Location: IL
Posts: 297
Default Re: 1941 Ford Pickup frame-off restore for the next generation

Trying to locate a picture of I believe to be a bracket to mount the inner fender well metal to the frame. You can see the holes in the center of the pic.

Whats strange to me is the other side has the same holes etc, but the bracket would need to be on the inside of the fender well compared to on the outside on the drivers side.

Anyone with pics of the 2 sides? With bracket??

1st pic is driverside, 2nd is pass side but by the time I get all lined up the actual fender well curved area sits more on the outside of the frame. This is all by lining everything up to hood.
Attached Images
File Type: jpg NCM_0578.jpg (67.8 KB, 107 views)
File Type: jpg NCM_0580.jpg (63.6 KB, 98 views)

Last edited by mrfliboy; 05-05-2015 at 07:44 AM.
mrfliboy is offline   Reply With Quote