Thread: Misfire mystery
View Single Post
Old 01-27-2024, 08:35 PM   #13
Fairlane514
Senior Member
 
Join Date: Apr 2022
Location: Brenham, TX
Posts: 105
Default Re: Misfire mystery

Thanks Rob, I went through the distributor, took it apart checked all suggested areas, they look good and almost new. No wobble in shaft, points look good, new condenser. Center is tight when moving the plate. Rub block looks good

Key switch may be in need of a closer look. I do notice when turning the ignition off, it seems to cut off very quickly maybe before the detent as you suggested.

Grounds from battery are good....one to the body at original location and another from there to the transmission with heavy 4 gauge wire. Both clean and tight

I do have a safety fuse wired to power cable at starter.

Mine is no longer pop out ignition switch.

I dont have the blue book by Les
Fairlane514 is offline   Reply With Quote