Quote:
Originally Posted by fast fredy
Dobie.. it does rotate but the best I can get is to draw pretty much right on the edge of the filter material . I'm thinking about pushing some extra of that filter material in the pickup tube before the pcv valve . I dont think it would suck any pieces up.. What do you guys think ? thanks Fred
|
In that case I think I'd find some new filter material and trim it to size so that it completely covers the nipple. Use the same material or something similar. I would NOT recommend anything like steel wool, and I wouldn't stuff any of into the nipple itself. Also, as KULTULZ says, it should have a baffle to keep oil ingestion to a minimum.