Quote:
Originally Posted by Synchro909
How long is a piece of string! Some people work quicker than others and I don't know what equipment you have but there is a fair amount of work in it. For a start, you'll need a spring spreader so the rear end can be opened. There is no need to take it right out. Take the tension off the spring, remove the two brake drums and hubs and remove the LHS trumpet. You will then be able to pull the axles and diff centre out of the housing. From there, it is easy to change the axle. The pinion stays where it was.
|
That sounds simpler than I imagined. However, I don’t have a spring spreader, and I don’t have a spare axle. I’ll need to look for both.
Sent from my iPhone using Tapatalk