Quote:
Originally Posted by katy
Probably stuck on w/gasket goo of some sort. Leave the 2 large bolts in loosely until it's loose. That way if you shmuck it w/a hammer it won't go flying.
|
That's some good advice there. So I've had two main suggestions: (a) give it some taps with a dead-blow hammer, see if it shakes loose; (b) use a thin implement such as a flathead screwdriver to gently work into the mating surface and see if it can be carefully pried apart.
Thanks all, and to those who DMed, I'll go try this out.