Re: 8CM to 8BA
If you have a completely assembled, rebuilt 8BA , to me the only thing most necessary to swap would be the water pumps that fit the 8BA and if you find it really necessary the intake to run the original carb.
To swap the heads would be a waste of time and if you don't like looking at the 8BA on the heads just grind them off.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
Last edited by 51 MERC-CT; 01-01-2019 at 10:49 PM.
|