Thread: Problem with a SignalStat turn signal switch
View Single Post
Old 10-21-2019, 10:47 AM   #2
duke36
Senior Member
 
Join Date: Jun 2015
Posts: 1,414
Default Re: Problem with a SignalStat turn signal switch
Had a light issue also. Mine is hot all the time, not wired to the switch. Took the lever cover off and checked the bulb and contacts which were gummed up with grease and misaligned. Be careful as the parts may fall out. The bulb should only light when each side or the emerg. are on. You may need to reduce the pdf with your browser. Also check the ground of the switch to the steering column.
Attached Files
File Type: pdf signal_1.pdf (38.3 KB, 37 views)
Last edited by duke36; 10-21-2019 at 10:52 AM.
duke36 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)