The Ford Barn - View Single Post

J Franklin · 03-30-2018, 02:47 PM

Light taps! us a body hammer, I use one with a pick, not a claw or ball-peen. a file across the top will show high and low spots. You may want to take it to a stainless repair guy if you have never done it before, or at least practice on some scrap that is similar.

03-30-2018, 02:47 PM	#2
J Franklin Senior Member Join Date: May 2010 Location: Oregon Posts: 5,966	Re: Removing dents from a 31 Radiator Shell Light taps! us a body hammer, I use one with a pick, not a claw or ball-peen. a file across the top will show high and low spots. You may want to take it to a stainless repair guy if you have never done it before, or at least practice on some scrap that is similar. Last edited by J Franklin; 03-30-2018 at 02:52 PM.