The Ford Barn - View Single Post

Y-Blockhead · 05-11-2020, 06:22 PM

Clean out the hole and see if you can get the lower shaft out also and clean it up.

Don't reinstall 'dry'. Coat the bottom with anti-seize or something similar.

05-11-2020, 06:22 PM	#34
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 5,849	Re: Distributor stuck Clean out the hole and see if you can get the lower shaft out also and clean it up. Don't reinstall 'dry'. Coat the bottom with anti-seize or something similar.