The Ford Barn - View Single Post

Russ/40 · 03-14-2020, 12:12 AM

[QUOTE=Kohnke Rebabbitting;1

So what you have now is 4 equal points for the bell housing, to bolt to, 9 & 3, and 12 & 6. So now the pilot shaft, will bolt, in alignment with the pilot bearing, if the crank is ground, and set correctly.Herm.[/QUOTE]

SO, whether doing the 9 & 3, or the 12 & 6, the same two top shim packs are used.?

03-14-2020, 12:12 AM	#16
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: Flywheel Housing Alignment [QUOTE=Kohnke Rebabbitting;1 So what you have now is 4 equal points for the bell housing, to bolt to, 9 & 3, and 12 & 6. So now the pilot shaft, will bolt, in alignment with the pilot bearing, if the crank is ground, and set correctly.Herm.[/QUOTE] SO, whether doing the 9 & 3, or the 12 & 6, the same two top shim packs are used.?