Re: Pilot Bearing Question
Hallo gw,
if the shaft can move inside the bearing seats, this is not a good thing because the main bearing wears out faster. A brass sleeve is difficult to manufacture because the wall thickness is too small.
I minimized the movement by glue a steel strip (0.1 mm) round the pilot stump (Locktite).
__________________
Beste Gruesse aus Deutschland,
Werner
Ford Model A, Roadster, 1928
Citroen 11 CV, 1947
Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version
|