05-25-2017, 11:23 PM
|
#18
|
|
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: Need a New Coil
Quote:
Originally Posted by Ronald
If you are using a 6 volt system then a 6 or 12 volt coil will do , no resister required . But if using a 12 volt system then a resister is required.
|
If you have 12v, use the Pertronix 40611 3 ohm coil. No resistor needed as it has an internal resistor. It is epoxy filled.
|
|
|