View Single Post
Old 08-23-2019, 01:18 PM   #5
Keith True
Senior Member
Keith True's Avatar
Join Date: May 2010
Location: Epping N.H.
Posts: 2,399
Default Re: Parasitic draw at turn signal on column

Well that narrowed it down a lot.With a direct line from the battery cable to the switch there won't be any draw through the ammeter.Also,look at a signal switch wiring diagram.Your power should be going to the flasher first,not to the switch.At least,that's how it's been done with universal switches for years.If it has power feeding the P wire on the switch,I believe it can do what yours is doing.P means pilot,not power.
Keith True is offline   Reply With Quote