View Single Post
Old 12-24-2020, 10:18 AM   #17
rockfla
Senior Member
 
rockfla's Avatar
 
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 3,957
Default Re: What to check on a 46 Mercury

Quote:
Originally Posted by FortyNiner View Post
The biggest issue is rust. Best to check the trunk floor - especially if it has the tool compartment feature, the running boards, and the rocker panels. The bumpers look better than new and may have had some work done on them. Interior looks correct and usable. The pictures look good.
above is the major areas of concern on the 46-48's, the rockers you really need to get it on a lift to truly inspect them, all along where the running board bolts to the car and area that faces the frame!!! The tool tray area is an easy look from both inside the trunk and from under the back, another area to look is the very front of the rocker section right where the bottom inside of the front fenders meet the body, this is where road grime tented to settle and build up thus holding moister and eventual rust!!! From there, as others have mentioned good oil pressure, running good with no over heating, stops good......Good looking Merc and GOOD Luck.
rockfla is offline   Reply With Quote