Re: Checking rear ratio
I have the engine out of the car and ran this test to double check my rear end ratio.
What does this tell you that I have.
With the engine out I turned the left rear wheel 1 turn counter clockwise, with the trans in 3rd gear.
The input shaft turned 1 full turn + an additional up to 7/8’s of a turn, it stopped just about at 11 o’clock. So, not quite 2 turns.
With the wheel turned two times counterclockwise input shaft turns two and three-quarter turns
Last edited by old31; 10-12-2017 at 03:43 PM.
|