The Ford Barn - View Single Post

DC 69 · 05-27-2017, 10:39 AM

Thanks for the help Gentlemen!

All shocks installed. Placing jack stands under frame allowed for enough room to align tubular link & arm. Stands under front axle compressed the spring, which didn't allow room to align parts. I used a floor jack to raise/lower axle to align parts.

Right front link is vertical, but left link has slight angle. Looks like the axle may be shifted to the left side. Would it be a big job to correct axle position?

05-27-2017, 10:39 AM	#4
DC 69 Member Join Date: Jan 2016 Location: Monterey Bay, Ca Posts: 35	Re: Shock Install Help Thanks for the help Gentlemen! All shocks installed. Placing jack stands under frame allowed for enough room to align tubular link & arm. Stands under front axle compressed the spring, which didn't allow room to align parts. I used a floor jack to raise/lower axle to align parts. Right front link is vertical, but left link has slight angle. Looks like the axle may be shifted to the left side. Would it be a big job to correct axle position?