The Ford Barn - View Single Post - Generator no-charge update

HoarseWhisperer · 05-19-2017, 01:28 PM

"To run the Diode Cutout Tom told me to snip the little green wire coming out of his EVR."

Hey, Jeff. Are you sure about snipping the Green wire for the diode? The instruction sheet I have from Tom says; " If you are using a Diode cutout, be sure to cut the BLUE wire. Separate ends about 1/16"."

05-19-2017, 01:28 PM	#17
HoarseWhisperer Senior Member Join Date: May 2010 Location: Ontario, Canada Posts: 1,470	Re: Generator no-charge update "To run the Diode Cutout Tom told me to snip the little green wire coming out of his EVR." Hey, Jeff. Are you sure about snipping the Green wire for the diode? The instruction sheet I have from Tom says; " If you are using a Diode cutout, be sure to cut the BLUE wire. Separate ends about 1/16"." __________________ I know a lot of things; I just can't remember them all. 1928 CCPU 82-A 1931 Roadster 40-B Dlx (Canadian)