The Ford Barn - View Single Post

Jim Brierley · 09-24-2019, 11:30 AM

With the front cover off, and marks on the gears aligned, no pistons are at TDC, this is normal. If the timing is off by 90*, it will not run at all. Don't know what to tell you where to start, so many things to check. Suggest you find a local A guy with experience. Good luck!

09-24-2019, 11:30 AM	#13
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,089	Re: Can the TDC pin be off by 90 Degrees? With the front cover off, and marks on the gears aligned, no pistons are at TDC, this is normal. If the timing is off by 90*, it will not run at all. Don't know what to tell you where to start, so many things to check. Suggest you find a local A guy with experience. Good luck!