The Ford Barn - View Single Post

Vic Piano · 02-23-2016, 12:44 PM

I have done this to a number of our antique vehicles, both 6 and 12 volt, Ford and non Ford. As mentioned previously, I modify the OEM fuel pump, making it a pass through (I detailed the modification on my thread "What I did on my Lunch Hour") and I leave the pushrod in. This way the Airtex pump and fuel pressure regulator (set at 2.5 lbs.) become the full time fuel delivery system.

02-23-2016, 12:44 PM	#4
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: Fuel pump I have done this to a number of our antique vehicles, both 6 and 12 volt, Ford and non Ford. As mentioned previously, I modify the OEM fuel pump, making it a pass through (I detailed the modification on my thread "What I did on my Lunch Hour") and I leave the pushrod in. This way the Airtex pump and fuel pressure regulator (set at 2.5 lbs.) become the full time fuel delivery system. __________________ Imagination is more important than knowledge.