The Ford Barn - View Single Post

Superhart · 11-12-2019, 10:47 AM

Thanks so much. Things are beginning to clear up. Too bad the diagram doesn't provide spacing measurements. I will have to purchase the kit and make up a drilling template. The only hole I now have is the single hole for the hand operated wiper shaft which does align with the notch in the header panel. Now I understand that the wiring passes through a drilled hole in the windshield frame to the inside of the car.

11-12-2019, 10:47 AM	#5
Superhart Senior Member Join Date: Nov 2019 Location: Hilton head, South Carolina Posts: 118	Re: Windshield Wiper Conversion Thanks so much. Things are beginning to clear up. Too bad the diagram doesn't provide spacing measurements. I will have to purchase the kit and make up a drilling template. The only hole I now have is the single hole for the hand operated wiper shaft which does align with the notch in the header panel. Now I understand that the wiring passes through a drilled hole in the windshield frame to the inside of the car.