The Ford Barn - View Single Post

Tinker · 07-07-2019, 11:21 PM

Ralph even in Florida I didn't experience it. I did experience coil fail but resolved it with skip.

I never run anything less then no eth.

I did have a starting issue recently. Pumped the accelerator after a run before cranking it.... Never had a issue before. Cranked it with accelerator to the floor and it started up, did 5 miles. Guess it was loaded up (flooded). Shouldn't have pumped it I guess.

We all have cool startup procedures.

.

07-07-2019, 11:21 PM	#14
Tinker Senior Member Join Date: May 2010 Location: MN Posts: 7,053	Re: Vapor lock question Ralph even in Florida I didn't experience it. I did experience coil fail but resolved it with skip. I never run anything less then no eth. I did have a starting issue recently. Pumped the accelerator after a run before cranking it.... Never had a issue before. Cranked it with accelerator to the floor and it started up, did 5 miles. Guess it was loaded up (flooded). Shouldn't have pumped it I guess. We all have cool startup procedures. .