View Single Post
Old 04-03-2018, 09:31 AM   #3
36and63
Senior Member
 
36and63's Avatar
 
Join Date: Jul 2013
Location: Wisconsin
Posts: 153
Default Re: 36 hubcap restoration

Take a new 1 gallon paint can, remove the cover. Cover with towel folded a couple times. Center the stainless cap upside down in the opening. Lay the painted cover onto the cap. I then use a 2x6 approximately 2 feet long on top the hubcap. Then with some force sit with all your weight on the board and it will pop the cap into place. It works really well and just make sure everything is aligned well before applying your weight.

Pat
36and63 is offline   Reply With Quote