The Ford Barn - View Single Post

Synchro909 · 08-05-2019, 05:43 AM

I'd take that pump off and move the collar to the front of the body (inside the fan hub) where it belongs and while it is out, I'd make sure the thrust washer between the impellor and the body is in its correct position. Otherwise, I think you are OK.

08-05-2019, 05:43 AM	#15
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,504	Re: Water Pump ID and Questions I'd take that pump off and move the collar to the front of the body (inside the fan hub) where it belongs and while it is out, I'd make sure the thrust washer between the impellor and the body is in its correct position. Otherwise, I think you are OK. __________________ I'm part of the only ever generation with an analogue childhood and a digital adulthood.