The Ford Barn - View Single Post - Checking blocks for condition Pressure testing

GB SISSON · 12-17-2022, 11:30 PM

Thanks all! I feel this is a very important topic to be discussing on the forum. With these blocks, testing is Everything. With today's labor rates a couple of cracks means a throw away, but success on a proper mag test, pressure test, and good bores, and you have something!

12-17-2022, 11:30 PM	#22
GB SISSON Senior Member Join Date: Jan 2014 Location: Orcas Island Washington Posts: 5,014	Re: Checking blocks for condition Pressure testing Thanks all! I feel this is a very important topic to be discussing on the forum. With these blocks, testing is Everything. With today's labor rates a couple of cracks means a throw away, but success on a proper mag test, pressure test, and good bores, and you have something! __________________ Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1946 Tonner Pickup with 226 H six, 1979 Toyota landcruiser wagon, now wearing 1947 Ford Jailbar sheet metal. 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) Last edited by GB SISSON; 12-17-2022 at 11:45 PM.