Re: Exhaust Diagram
Ironically, the best picture or diagram came from a picture of a model truck. The pipe in front of the muffler has 4 90* bends in it, an inside bend, two outside bends and an inside bend. This conflagration of bends goes under the side rail and is tucked up between the running board and the cross member where it is riveted to the rail. The pictures that Waldron sent me of the pipes laid out on the floor, had this pipe reversed adding confusion to the picture. I showed this to a friend with an F1 with a non stock system and he agreed that the pipe was shown wrong in the picture.
Tomorrow I get out the torch and bend to suit. Thanks for the additional advice.
Bill
|