The Ford Barn - View Single Post

19Fordy · 03-15-2019, 09:15 AM

Zax40: You can use a piece of material cut from an old leather belt.
I have always wondered if it would be possible to install a small nut and bolt jackscrew
between the intake and the bottom of the generator so that you could easily tighten the belt tension. I know space is very limited.

03-15-2019, 09:15 AM	#17
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,942	Re: Tightening the fan belt on a show car Zax40: You can use a piece of material cut from an old leather belt. I have always wondered if it would be possible to install a small nut and bolt jackscrew between the intake and the bottom of the generator so that you could easily tighten the belt tension. I know space is very limited.