The Ford Barn - View Single Post

doizateb · 07-03-2015, 08:14 AM

Thanks jetmek. That's what I originally thought. When I started to do that, I found that the shaft was offset to the driver side and the hole itself would not allow me to get a 7/16 socket through it to reach the nut. At that point I thought there must be another method. I would attach a picture but don't have a place to store them with a url to get to them.

I have very carefully managed to enlarge the hole enough to get the nut off and now have the wiper motor out. Probably would not have done that without your post saying that is the proper way to remove it. Btw, it had no washer. Will use one when installing.

07-03-2015, 08:14 AM	#9
doizateb Junior Member Join Date: Jun 2015 Posts: 4	Re: S/W 1931 Town Sedan Wiper Removal Thanks jetmek. That's what I originally thought. When I started to do that, I found that the shaft was offset to the driver side and the hole itself would not allow me to get a 7/16 socket through it to reach the nut. At that point I thought there must be another method. I would attach a picture but don't have a place to store them with a url to get to them. I have very carefully managed to enlarge the hole enough to get the nut off and now have the wiper motor out. Probably would not have done that without your post saying that is the proper way to remove it. Btw, it had no washer. Will use one when installing.