[CrownVic55]

Kultulz, Info on T85 as follows: Side cover WG DIV, T89B-148, Q6
On pass side of transmission: T 85 C-1A, WG DIV
On a plate cast into transmission 9-19
On overdrive unit:/stamped in tail shaft W1, on plate cast into tail shaft J276
Raised letters on tail shaft WG R11-1J

Don't know if this is any help. The measurement from the bell housing to trans mount is 12 inches, same as T86. Main problem is the tail shaft length is 6 1/2 inches longer than the T86.

Thanks for replying, knew I could count on you.
Ben

The solenoid is 12 volt. Tranny came out of a 57 Ford.