08-14-2020, 03:49 PM
|
#34
|
|
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,107
|
Re: PCV VALVE SYSTEM for 8BA with Early Intake Manifold
Quote:
Originally Posted by Heard
Bill,
I think you misunderstand how this is plumbed. The air is drawn down through the filler tube vent into the crankcase, then up through the old original fill tube at the front of the block, across the valve chamber area back to the rear of the block, then up through the pcv valve, out through the spacer block and into the manifold.
The line from the fill tube at the front of the engine to the pvc valve is sealed. No way for the pcv to draw air anywhere EXCEPT from the crankcase.
Heard
|
Yup, clear as mud! DD
|
|
|