The Ford Barn - View Single Post

RockHillWill · 09-10-2014, 07:21 PM

I appreciate the kind words, guys, thanks.

Here are some updates on the exhaust system. We got the individual tubes cut and fit, then mated them to the tapered collector, and tack welded in place, pending the completion of the carburetor intake manifolds.

ExhaustAssy.jpg

willy1 027.jpg

willy1 029.jpg

willy1 033.jpg

willy1 035.jpg

willy1 040.jpg

willy1 042.jpg

09-10-2014, 07:21 PM	#75
RockHillWill Senior Member Join Date: May 2010 Location: Rock Hill, S.C. Posts: 985	Re: I could not sit idle, have a new project I appreciate the kind words, guys, thanks. Here are some updates on the exhaust system. We got the individual tubes cut and fit, then mated them to the tapered collector, and tack welded in place, pending the completion of the carburetor intake manifolds. ExhaustAssy.jpg willy1 027.jpg willy1 029.jpg willy1 033.jpg willy1 035.jpg willy1 040.jpg willy1 042.jpg __________________ Uncle Bud says "too soon old, too late smart!"