The Ford Barn - View Single Post

Fordestes · 10-29-2019, 01:33 PM

The orientation to the outside or inside should not make any difference after all the bearings are floaters . the only thing offset would be the wristpin location in the piston, the front of the piston (most of the time) is marked in some way such as an arrow or the letter F .

10-29-2019, 01:33 PM	#2
Fordestes Senior Member Join Date: May 2010 Posts: 886	Re: 21A rods The orientation to the outside or inside should not make any difference after all the bearings are floaters . the only thing offset would be the wristpin location in the piston, the front of the piston (most of the time) is marked in some way such as an arrow or the letter F .