Quote:
Originally Posted by Bill G
If the adjusting wedge is threading in and out, then the top end of the shoes would be going in and out to follow the wedge. If not, then my guess would be that the brake adjusting shafts are not properly seated or the shoes at the bottom are not on the roller tracks and therefore not being held out in the proper position. My 2 cents
|
Yes, adjusting wedge is threading but it sure doesn't seem like the shoes are going in and out to follow the wedge. And I installed a new set of brake adjusting shafts today hoping to fix the problem and I'm pretty sure they were seated properly. In the morning I'll take it apart again and examine roller tracks more closely. Thank you Bill.