Re: Crimp style connector/wiring question
Go out to your shop and crimp a wire connector. Give it your best shot. Then cut it in half and sand the cut end to form a good cross section. Then compare it with the photo below.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
Last edited by nkaminar; 09-30-2021 at 06:11 AM.
|