Re: F1 wheel cylinders
Suspect that you are erroneously using torque specs. meant to be applied when using aluminum disc brake calipers with steel bleed screws.
Steel on steel requires a much higher torque value.
Considering that they are 3/8-24 thread size, 25-35 lb. ft. may be more in order.
Tighten them until the weeping stops.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
Last edited by 51 MERC-CT; 10-01-2018 at 07:49 AM.
|