The Ford Barn - View Single Post

Terry,OH · 08-07-2014, 06:37 AM

Make sure the master cylinder piston can return all the way and the actuating rod (adjustment ) is not prevent it's return. With the brake pedal back to it's stop there has to be a slight bit of clearance between MC piston and rod. Make sure the brake pedal return spring takes the pedal to it's stop.

08-07-2014, 06:37 AM	#64
Terry,OH Senior Member Join Date: May 2010 Posts: 4,751	Re: Yes, they are still out there NUMBER 2 Make sure the master cylinder piston can return all the way and the actuating rod (adjustment ) is not prevent it's return. With the brake pedal back to it's stop there has to be a slight bit of clearance between MC piston and rod. Make sure the brake pedal return spring takes the pedal to it's stop.