The Ford Barn - View Single Post - Question on power to the light / horn switch

Badpuppy · 10-14-2020, 08:37 AM

I ran a ground wire between the light conduit to the forward hood latch screw on each side. Attach tinned wire end to conduit with a hose clamp, #10 lug on the frame. Eliminates problematic connections through bar and fenders. I added a horn relay and ran its ground wire through the horn conduit to the same point on the frame.

10-14-2020, 08:37 AM	#4
Badpuppy Senior Member Join Date: Dec 2017 Location: Guthrie, OK Posts: 1,145	Re: Question on power to the light / horn switch I ran a ground wire between the light conduit to the forward hood latch screw on each side. Attach tinned wire end to conduit with a hose clamp, #10 lug on the frame. Eliminates problematic connections through bar and fenders. I added a horn relay and ran its ground wire through the horn conduit to the same point on the frame.