The Ford Barn - View Single Post

jw hash · 03-15-2018, 11:19 PM

the early 30 used the same starter rod grommet as the 28-29 then they went with a big round one that was made for the big hole in the firewall. then after that they used the grommet and cover with three rivets in it.

03-15-2018, 11:19 PM	#8
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,552	Re: Very Early 1930 Model A bodies... the early 30 used the same starter rod grommet as the 28-29 then they went with a big round one that was made for the big hole in the firewall. then after that they used the grommet and cover with three rivets in it.