Re: Eddie Meyer Intake, No Fan Mount
At one time there was a bolt on bracket available that mounts on top of the intake at the front using the first two bolt holes on each side. This bracket has a stud in the center for mounting the fan and generator bracket. The last one I came across was years ago at the Ford Store in San Demas California Bill would not let it go extremely to hard to find. The bracket to my knowledge has never been reproduced the original brackets are rare but there must be some around.
Ronnieroadster
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH
Last edited by Ronnieroadster; 11-03-2021 at 07:42 PM.
|