View Single Post
Old 12-20-2019, 09:20 AM   #5
L-head
Senior Member
 
Join Date: May 2010
Posts: 126
Default Re: 1940 3/4 t axles

It is worth saving. Lots of people are building "dirt track" old cars. They need the 3/4T hubs, diff carrier, and axles. If they are using a quick change center section, they actually need 2 left side axle housings plus the qc center. If they cut the ends off of the axle housings to use on stock Ford front spindles, they will not bolt on directly; the bolt patterns are different. The backing plates look like passenger car but the bolt pattern is larger. Shoes are the same, the grease baffles are different (larger bolt pattern).
L-head is offline   Reply With Quote