View Single Post
Old 12-15-2019, 01:59 PM   #2
supereal
Senior Member
 
supereal's Avatar
 
Join Date: Jul 2014
Location: Iowa
Posts: 1,424
Default Re: Tutorial: patch repair to worn pinon splines '37

If the pinion splines are badly worn, it is likely that the driveshaft is too, probably due to a broken or sheared pin holding the shaft to the pinion. You might try using a driveshaft coupler. From the photo, it looks like you have a 10 spline shaft. The coupler is available from C&G as 48-4684. the 6 spline version is 68-4684. The coupler pin is 48-4607.Their phone is 800/266-0470.
supereal is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)